'98 Subaru Forester power lock question

Home / the12volt's Install Bay / Car Security and Convenience / '98 Subaru Forester power lock question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DJRr

Member - Posts: 9

Joined: January 23, 2005

Posted: January 24, 2005 at 3:25 PM / IP Logged

Hi huys,

I've got a small problem with an alarm installation on a '98 Subaru Forester. Everything is fine except for the power door locks. I've found the stock module which has 9 wires. I've got the vehicle's wiring codes and it says a white wire and a WHITE/ red wire are the lock/unlock wires. But they don't seem to be right.

The alarm is an older K-9 I guess it's model 5.

If anyone has gone through this vehicle before, please give me out any recommendations.

Thanks a bunch in advance!

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: January 24, 2005 at 3:36 PM / IP Logged

try RED / white for lock and yellow/red for unlock negative triggers.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'98 Subaru Forester power lock question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.