Compustar Installation problems

Hello, I'm having trouble connecting a compustar to a 1997 Dodge Neon. I bought the unit used from ebay, and I guess it didn't come with the installtion manual. All I really have to go by is the diagram on the module itself. Now, as far as I understand with compustar the dome light supervision needs to be connected for it to work. Will this work if I attache it into the door switch or vice versa? Also, I'm confused about the second harnes which has the following wires: light output, status output, ignition output, accessory output, and starter output. My main concern is that the module says that these wires have a negative polarity so I am not sure if I'm supposed to attach them to their corresponding wires which have a positive polarity. Any help will be greatly appreciated. Thanks!

If you goto compustar.org you can get the user manual that you need. As for the 2nd harness with the ign. acc. and starter output is to drive a relay. It's for if your vehicle has a 2nd ign, 2nd acc or 2nd starter that needs to be wired up.

godsegoizhuge wrote: If you goto compustar.org you can get the user manual that you need. As for the 2nd harness with the ign. acc. and starter output is to drive a relay. It's for if your vehicle has a 2nd ign, 2nd acc or 2nd starter that needs to be wired up.

The site has been updated and there is no longer any links for installation

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Go here instead for the manuals Manuals Keep it on the down low..last time I gave a compustar link they killed it...lol

actually if you click under support and click on the customer support link at the top, it takes you to the page to access the user manual. Or atleast I managed to access it LOL.

the user manuals provide no help for wiring. click the link 2 messages above. Thanx metaverse!