2001 Dodge Ram Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Dodge Ram Remote Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

mopar4x4

Member - Posts: 7

Joined: January 30, 2005

Location: United States

Posted: January 31, 2005 at 9:57 AM / IP Logged

You wouldn't happen to have a drawing of the hook up would you? As far as the relay goes.

Back to Top

mopar4x4

Member - Posts: 7

Joined: January 30, 2005

Location: United States

Posted: January 31, 2005 at 10:00 AM / IP Logged

You wouldn't happen to have a schematic of how you hooked your doors up would you? Not sure how to wire the relay for unlock. Also do you just hook up the positive output from the keyless to the lock wire?

Back to Top

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: January 31, 2005 at 10:04 AM / IP Logged

2001 Dodge Ram Remote Start - Page 2 -- posted image.

Now remeber, your unlock is the only one needs a realy so dont worry about the lock relay. When you cut the wire in half the motor side is the wire that plugs into the box next to the steering colum.

MECP certified (If it really means anything)

Jeremy

Back to Top

mopar4x4

Member - Posts: 7

Joined: January 30, 2005

Location: United States

Posted: January 31, 2005 at 4:38 PM / IP Logged

Ok, I'm probably going to sound like an idiot here but I hooked the orange and green to the lock output on the system. That worked fine. Then I cut the pink and green wire and hook the motor side(closest to the module) to the pin #30 and the other end to pin number 87a. Along with the +12v to pin 87. Now when I press lock it works but unlock doesn't. Heres where it gets kinda strange If I hook the lock output to either the relay or the orange and green wire it locks the doors. But nothing seems to unlock the doors. I'm installing a audiovox prestige aps686t.

Back to Top

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: February 01, 2005 at 6:45 AM / IP Logged

Be sure you have the right unlock wire. There are a couple of colors that resemble the pink/green wire. be sure to pull the right one. If that doesent work try reversing pin 30 & 87A.

MECP certified (If it really means anything)

Jeremy

Back to Top

mopar4x4

Member - Posts: 7

Joined: January 30, 2005

Location: United States

Posted: February 02, 2005 at 10:02 AM / IP Logged

Thanks again for all your help. I finally have it working. The Audiovox prestige 686t requires 2 relays . The reason for this is both keyless door outputs are a negative switch so the only way it will work is if both are hooked to a relay as negative. There may have been another way but I couldn't figure it out. Just glad it works.

Thanks,

Tom

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Dodge Ram Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.