how to program Valet 552t

Home / the12volt's Install Bay / Car Security and Convenience / how to program Valet 552t (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Anthnynixon

Member - Posts: 42

Joined: January 26, 2005

Location: United States

Posted: January 27, 2005 at 12:47 AM / IP Logged

I picked up a valet 552t remote starter, peace of cake to install as the truck it was put in to was automatic, with no power option, so just like 7 wires and it was good to go. Here is my question? When it is remote started the lights flash as its started and running, on my car I have a compustar alarm that once the car is started the light stay on constantly, not flashing. Do anyone know how to program it or a link to where I can find out how to program it?

Thanks

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: January 27, 2005 at 7:21 AM / IP Logged

put the key in the ignition on off and press the valet swich four times and then one more time and hold it ,the led will flash four times, and the press unlock for constant parking lights or lock for flashing parking lights

how own your mind, control your life.

MECP certified. always use a DMM

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 27, 2005 at 8:27 AM / IP Logged

actually if i remember correctly it's the 4th feature in the second menu... press the valet switch and hold it until it flashes twice and the horn (if hooked up) honks twice, then tap the switch 4 times and hold it... this will allow you to change menu 2 - feature 4...

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Anthnynixon

Member - Posts: 42

Joined: January 26, 2005

Location: United States

Posted: January 27, 2005 at 1:46 PM / IP Logged

sweet thanks guys, now I just have to find a valet switch the unit didnt come with one, the only ones on ebay are in a bulk of 5 and want 10 bucks for shipping. do you know where I can get one? There is an authorized dealer about 5 miles away, do you know how much one cost?

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 27, 2005 at 1:49 PM / IP Logged

it should have come with the unit...... a generous dealer in a good mood may just give you one... we have boxes of them here....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

traitorhound

Member - Posts: 13

Joined: January 25, 2005

Posted: January 27, 2005 at 2:54 PM / IP Logged

you could make a valet switch, all it is a momentary spst NO switch wired up to its appropriate place if all other options fail

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to program Valet 552t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.