Horn Honking with remote start, 99 Jeep
Welcome Guest :)
abad355ta
Member -
Posts: 36
Joined: December 30, 2002
Location: South Carolina, United States
Posted: January 27, 2005 at 12:41 PM / IP Logged
Montrealler wrote:
If the installer did not hook up the door lock he also probably didn't disarm the factory alarm of the vehicule. Ther is how to check lock the vehicule using the Jeep factory remote. Wait a full minute. Then , remote start . Does the horn honk ?.. Test 2.....
Unlock the door and do not arm the factory alarm of the vehicule. Wait a Full minute. Remote start ......
If in the first test the horn honk and in the second the horn remain silent that mean that the installer is disarming the alarm with the transponder and the ignition wich is causing a timing problem sometimes ..
Must disarm before remote start.
|
|
|
Will try ASAP. wifes at work. thanks for tshooting
abad355ta
Member -
Posts: 36
Joined: December 30, 2002
Location: South Carolina, United States
Posted: January 27, 2005 at 12:45 PM / IP Logged
Montrealler wrote:
If the installer did not hook up the door lock he also probably didn't disarm the factory alarm of the vehicule. Ther is how to check lock the vehicule using the Jeep factory remote. Wait a full minute. Then , remote start . Does the horn honk ?.. Test 2.....
Unlock the door and do not arm the factory alarm of the vehicule. Wait a Full minute. Remote start ......
If in the first test the horn honk and in the second the horn remain silent that mean that the installer is disarming the alarm with the transponder and the ignition wich is causing a timing problem sometimes ..
Must disarm before remote start.
|
|
|
OK, will try tonite. I installed the alarm. will try to disarm before rstarting. It just started honking all of the sudden
thx for tshooting
Follow the12volt.com
Thursday, May 2, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.