dei 516u

Home / the12volt's Install Bay / Car Security and Convenience / dei 516u (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chino

Member - Posts: 9

Joined: July 19, 2004

Location: United States

Posted: January 27, 2005 at 7:53 PM / IP Logged

Hey ....anyone out there can tell me to wire up a relay to boost the ground for this installation...???

installing a 516U Voice Module on a Trojan 500ANS alarm.

was told the ground strenght from the ground ( yellow ) wire off of the starter kill wasn't enough to give the module a proper signal...

was told to drop in a relay...i tried but no luck...

Thing is i have the relay wired...30 = constant .... 85 = Ground , 86 to ORANGE on 516U and 87 to Yellow Ground When armed wire on the Alarm module....as how i thought it should have been done..but no luck....

hellllppp someone....

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 27, 2005 at 9:49 PM / IP Logged

85 +12V, 86 ground when armed from alarm(starter kill output), 30 ground, 87 output to starter kill and 516U.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: January 28, 2005 at 6:46 AM / IP Logged

85 as ground, 86 12v from siren wire , 87 gound and 30 goes to 516u

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 28, 2005 at 9:18 AM / IP Logged

He needs to boost the ground when armed not send a ground when the siren is sounding.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

chino

Member - Posts: 9

Joined: July 19, 2004

Location: United States

Posted: January 28, 2005 at 1:34 PM / IP Logged

thanks Auex...will try it later when i get home...

and let you know how it goes.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 516u

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.