crossovers

Home / the12volt's Install Bay / Car Audio / crossovers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sexican

Member - Posts: 11

Joined: April 30, 2004

Location: United States

Posted: January 30, 2005 at 5:36 PM / IP Logged

ok so i really don't know much about crossovers and i jumped the gun and purchased these two crossovers off ebay without knowing what they could do. are these crossover for highs or to help base? kind of comfused crossovers - Last Post -- posted image.

http://www.idswindowtint.com/113004/crossovers1-01.jpg

leo

dwarren

Platinum - Nominee - Posts: 1,811

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 03, 2004

Location: California, United States

Posted: January 30, 2005 at 5:39 PM / IP Logged

these are used in a component system consisting of a mid bass driver and a tweeter. basically it will seperate the frequencies going to the speakers, no bass to the tweeters, etc. why did you buy them?

sexican

Member - Posts: 11

Joined: April 30, 2004

Location: United States

Posted: January 30, 2005 at 5:51 PM / IP Logged

i bought these because i wanted them to help out my highs. but i bid on them and then i realized i didnt know what they were for.

so are they good for component speakers/6x9/ tweeters? do i need to hook them up to an amplifier or how do they work. or should i get another crossover.

whats a good speaker that would work with this

thanks

leo

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: January 30, 2005 at 5:58 PM / IP Logged

good for component speakers yes, meaning a seperate mid and tweeter. You will probably won't be able to power a 6x9 with these since the 6x9's have a built in x-over and only one input.

Again what are specifically wanting to do with these? list what speakers and components you have please

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: January 30, 2005 at 5:59 PM / IP Logged

good for component speakers yes, meaning a seperate mid and tweeter. You will probably won't be able to power a 6x9 with these since the 6x9's have a built in x-over and only one input.

Again what are you specifically wanting to do with these? list what speakers and components you have, please.

go to www.bcae1.com and carefully read the passive crossover section number 54.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

crossovers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.