05 Pilot Alpine Nav-200 install

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 05 Pilot Alpine Nav-200 install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

LarryB123

Member - Posts: 3

Joined: January 31, 2005

Location: United States

Posted: January 31, 2005 at 11:36 AM / IP Logged

I have the new Alpine NAV-200 system installed, except for the VSS (vehicle speed sensor) connection. After getting some printouts from my local Honda dealer, I would need to to rip the dash out. Can I use a connection to the speed control? And where will it be located? Thanks for the help!

LarryB123

slammedb5

Copper - Posts: 103

Joined: January 05, 2005

Location: United States

Posted: February 02, 2005 at 2:35 AM / IP Logged

Probe the cruise control harness.

EK Civic

security

no audio

alpineguy678

Member - Posts: 11

Joined: May 21, 2004

Location: United States

Posted: February 02, 2005 at 11:29 AM / IP Logged

Alpine actually makes a part NVE-K300 that is a speed pulse generator. It is designed for older vehicles that do not have a VSS wire, but it will work on any vehicle and it Works very well.

LarryB123

Member - Posts: 3

Joined: January 31, 2005

Location: United States

Posted: February 02, 2005 at 12:05 PM / IP Logged

Thanks for the info. I know my new Pilot has a vehicle speed sensor that will work. I know that the wire is coded blue/white. I'm just not sure where the speed control is under the hood, or what it looks like. Also, what should the voltage range be when I finally find it?

LarryB123

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 Pilot Alpine Nav-200 install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.