pheonix digital 01 silverado

Home / the12volt's Install Bay / Car Security and Convenience / pheonix digital 01 silverado (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

donnydougan

Member - Posts: 16

Joined: January 09, 2005

Location: United States

Posted: February 06, 2005 at 10:47 AM / IP Logged

I have a 01 silverado and when I installed the alarm I cannot lock the doors with the remote, but it will unlock with the remote.And when I arm the truck and then disarm it and unlock the door with the remote and open it, the factory alarm goes off not the new alarm. Also whenever the alarm is disarmed and I open the door it does not show that either door is open on my lcd.

Thanks, Donny

Back to Top

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 06, 2005 at 10:58 AM / IP Logged

You need to hook up a disarm output from the Phoenix to the factory disarm wire on the pick-up. As far a locking goes, did you test the wire you grabbed? You may have grabbed the wrong wire. As far as the LCD not showing the doors opening: Are the doors at least setting off the siren? How did you connect the door triggers to the alarm?

J Rilla

Owner/Installer

Back to Top

donnydougan

Member - Posts: 16

Joined: January 09, 2005

Location: United States

Posted: February 06, 2005 at 3:27 PM / IP Logged

There is no wire for disarm output on the alarm,so is there another wire that I can use ?

Yes I know I have the right wire for the lock, but on the alarm output to the lock wire, when I press lock on the remote It only reads 1 or 2 volts, so I wonder if its an alarm problem, but since the doors dont lock it will not arm. But if I press the querry button on the remote to check the status on the it truck and one of the doors is open it will show it open so I guess the door pins are fine ? Any help

Thanks, Donny

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 06, 2005 at 7:40 PM / IP Logged

does this Phoenix alarm have (+)POS outputs for the locks? your truck is POS

Lock is Lt.blue

Unlock is white

factory disarm is Lt. Green NEG(-)

Use your unlock wire from the brain and a relay to trigger the disarm, at the same time as unlock....Remember unlock is POS and disarm is NEG....thats why a relay is needed

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pheonix digital 01 silverado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.