Need Door Speakers

Home / the12volt's Install Bay / Car Audio / Need Door Speakers (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

bullman96

Silver - Posts: 294

Joined: October 03, 2004

Location: United States

Posted: February 06, 2005 at 10:42 PM / IP Logged

search around ebay for a pair of boston accoustic coaxials that are used and an amp for your subs. look at kenwood, alpine, mtx, jbl. you will find all you need used, what exactly is your budget?

Pioneer PEH-9660mp

Mb Quart PCE-216 biamped

JL 12W6v2

Sony XM-4026 amp for tweeters

Kenwood KAC-7251 amp for mids

JL-4100 amp for sub

kevinjensen68

Member - Posts: 31

Joined: February 05, 2005

Location: United States

Posted: February 06, 2005 at 10:47 PM / IP Logged

Well...I think im gonna go with those Pioneers because its a $100 for all 4. As for another amp for the subs, I have wanted one for a while but just havent had the extra cash to do so.

bullman96

Silver - Posts: 294

Joined: October 03, 2004

Location: United States

Posted: February 06, 2005 at 10:54 PM / IP Logged

alright, the deck will be fine to run those speakers so dont even worr about another amp.

Pioneer PEH-9660mp

Mb Quart PCE-216 biamped

JL 12W6v2

Sony XM-4026 amp for tweeters

Kenwood KAC-7251 amp for mids

JL-4100 amp for sub

kevinjensen68

Member - Posts: 31

Joined: February 05, 2005

Location: United States

Posted: February 06, 2005 at 11:03 PM / IP Logged

Thank you for the help bud Need Door Speakers - Page 2 -- posted image.

bullman96

Silver - Posts: 294

Joined: October 03, 2004

Location: United States

Posted: February 06, 2005 at 11:08 PM / IP Logged

no problem man. do stay away from the rest of the stuff there.

Pioneer PEH-9660mp

Mb Quart PCE-216 biamped

JL 12W6v2

Sony XM-4026 amp for tweeters

Kenwood KAC-7251 amp for mids

JL-4100 amp for sub

kevinjensen68

Member - Posts: 31

Joined: February 05, 2005

Location: United States

Posted: February 06, 2005 at 11:18 PM / IP Logged

Oh I know

djdaveoc

Copper - Posts: 231

Joined: April 28, 2004

Location: United States

Posted: February 09, 2005 at 3:27 AM / IP Logged

Personally, I also wouldn't buy any speakers without an amp to run them. Any speaker that can take decent power (even 50 watts RMS at 4 ohm), will sound many times better on even a cheap amp. You can probably get a used 4 channel amp that puts out 50 watts X 4 RMS into 4 ohms used on Ebay for less than $100. And you won't have to turn up the head unit to max volume to make the speakers sound decent. Also, the speakers won't blow from the head unit amp clipping.

Plan, Research, Do

kevinjensen68

Member - Posts: 31

Joined: February 05, 2005

Location: United States

Posted: February 10, 2005 at 12:30 AM / IP Logged

What I have hooked up to the subs is a 4/3/2 channel 280max Kenwood, they are 2 MTX Blue Thunder 10's, I was planning on using that for the door speakers and getting a single channel amp for the subs, thats probily what I will do when I find a descent sub amp.

djdaveoc

Copper - Posts: 231

Joined: April 28, 2004

Location: United States

Posted: February 10, 2005 at 12:45 AM / IP Logged

Sounds good. Just make sure the wattage matches up and the amp has the right kind of crossover.

Plan, Research, Do

kevinjensen68

Member - Posts: 31

Joined: February 05, 2005

Location: United States

Posted: February 12, 2005 at 5:40 PM / IP Logged

How would I go about wiring these speakers up to an amp? Do the speaker wires go to the amp and then to the speakers instead of just going straight to the speakers? Thanks.

Kevin

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.