attler 369D problem explained but...

Home / the12volt's Install Bay / Car Security and Convenience / attler 369D problem explained but... (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

devile

Member - Posts: 45

Joined: November 27, 2004

Location: Canada

Posted: February 06, 2005 at 8:42 PM / IP Logged

Ok, remote start works fine. I diagnosed with voltage tester and found out that yes i had the right wires. HOWEVER, the relay(the once included with 369D system) is clicking, but there is not voltage coming from the relay to the door lock/unlock wires. I hope i didn't leave any details out. THanks in advance for the help

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 06, 2005 at 8:46 PM / IP Logged

Are you testing the small gauge blue and green or are you testing the wires coming off of the 451M, at least I think that is what comes with it? If it is the 451M, where is the purple wire hooked up to?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

devile

Member - Posts: 45

Joined: November 27, 2004

Location: Canada

Posted: February 06, 2005 at 8:52 PM / IP Logged

The purple wire is hooked up to ground. And i'm testing the wires coming off of the 451M.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

attler 369D problem explained but...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.