Stuck between fiberglass and a hard spot

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Stuck between fiberglass and a hard spot (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Schimmel03

Member - Posts: 8

Joined: February 08, 2005

Location: United States

Posted: February 08, 2005 at 11:02 AM / IP Logged

Well, I just got done laying 2 layers of fiberglass in my spare tire well and when I tried to pull it out of the trunk it is stuck to the tape and won't come out. Any ideas on what I can do to get it out? Thanks!

Eric

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: February 08, 2005 at 12:14 PM / IP Logged

If the tape wont come out with it I can't think of any way to pull it out without damaging it

Back to Top

97Avalonxls

Copper - Posts: 115

Joined: November 17, 2004

Location: United States

Posted: February 08, 2005 at 12:26 PM / IP Logged

if you can, spray a little wd40 under the glass you've layed, let it sit overnight and possibly the next morning some of the tape's adhesive should have given way. try to apply pressure evenly around the edges looking for any give, that where to spray your wd. good luck

Back to Top

realitycheck

Silver - Posts: 751

Joined: September 09, 2004

Posted: February 08, 2005 at 1:54 PM / IP Logged

Also if you have an air compressor getting air underneath it makes it pop out.

Learning the trade one fiberglass creation at a time!

Back to Top

Schimmel03

Member - Posts: 8

Joined: February 08, 2005

Location: United States

Posted: February 08, 2005 at 5:05 PM / IP Logged

Thanks for the info! The WD-40 idea worked. Made a bit of a mess, but it worked. Thanks again for the help!

Eric

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Stuck between fiberglass and a hard spot

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.