Kill Switch

Home / the12volt's Install Bay / Car Security and Convenience / Kill Switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

juanpito

Member - Posts: 43

Joined: February 09, 2005

Location: United States

Posted: February 10, 2005 at 5:48 AM / IP Logged

I had my system for about 4yrs now. Commander 7000PC and a couple of days ago I notice that the Kill Switch doesn't work any more. Reason is I checking out the system trying everything out Door, Trunk, Hood, and checked to see if the car starts with the alarm on and it did. It was working before.

Is it maybe the Kill switch went bad?

How do I check if it's still work before I buy a new one.

Nissan Altima 96 GXE

Juan67

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: February 10, 2005 at 6:11 AM / IP Logged

check the starter kill relay. when you arm the alarm the relay have to work you will hear a clic. plus 86 is your ignition, 85 ground when is armed and 30 motor side, 87a key side. check the 86 and 85 in the relay.

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

juanpito

Member - Posts: 43

Joined: February 09, 2005

Location: United States

Posted: February 10, 2005 at 7:32 AM / IP Logged

Thanks, I'll check it out today....

Juan67

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kill Switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.