Box

Home / the12volt's Install Bay / Car Audio / Box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Eat_mor_chikin

Member - Posts: 12

Joined: September 08, 2004

Posted: February 16, 2005 at 7:12 AM / IP Logged

How do I find out the measurements of the box? And which box to get? Or you can just show me a website to buy it!

With two of these subs. http://www.cardomain.com./item/POWMOFO12

Search for other posts by Eat_mor_chikin

Bmnicolosi

Copper - Posts: 173

Joined: January 26, 2005

Location: Louisiana, United States

Posted: February 16, 2005 at 10:17 AM / IP Logged

just build a box with the volume that is recommened on that website---it's hard to find prefabbed boxes with that much airspace.

If you say "I already know how", don't ask me a single question.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: February 16, 2005 at 10:53 AM / IP Logged

I can't recomend those subs, but if using them is your plan then I do recomend you either build or have built a proper enclosure for them. Any reputable car stereo shop in your area can handle building an enclosure for you. Finding a pre-fab that will suit them is a difficult proposition if not impossible.

Realize the MFG recomendation of a 2.4 cuft ported enclosure tuned to 40Hz is for ONE of these. Putting two into the same enclosure will be different and not simply twice this size.

Here are the manufacturers specs for designing your enclosure: Fs: 36.7 Hz; Vas: 20.67 l. ; Qts: 0.3363 ; Xmax: 0.7"

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.