illuminated entry problems

Home / the12volt's Install Bay / Car Security and Convenience / illuminated entry problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davidachew

Member - Posts: 31

Joined: January 14, 2005

Location: United States

Posted: February 18, 2005 at 11:23 AM / IP Logged

ok here is the situation, installed remote entry alarm in 05 f250, works great except the illuminated entry. this is what i did, spliced the positive door triger and illuminated entry output togeather and ran a siingle wire to the courtesy lite connection wire. is that where my problem is? do i need to run 2 seprate wires to that connection? Im lost. Thanks for the help.

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: February 23, 2005 at 9:43 AM / IP Logged

what unit are you using????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: February 23, 2005 at 12:25 PM / IP Logged

do you have an onbord realy for dome light.

Back to Top

dar1

Member - Posts: 23

Joined: December 05, 2003

Location: United States

Posted: February 23, 2005 at 9:10 PM / IP Logged

Depending on schematics for your vehicle you may need a relay and direct positive feed from +12volt source

one love

Back to Top

cutter1122

Copper - Posts: 103

Joined: January 16, 2005

Location: Canada

Posted: February 23, 2005 at 9:24 PM / IP Logged

Door Trigger

BLACK/ yel (L), BLACK/ pink (R)

-

DKP, gray plug, pins 22, 23

The wiring above is for vehicles without keyless entry. Vehicles with keyless entry, the door trigger wires are found at the BCM, green plug. The LF door trigger is BLACK / YELLOW in pin 4. The RF door trigger is BLACK/ pink in pin 5. The LR door trigger is BLACK/ lt. blue in pin 12. The RR door trigger is BLACK/ white in pin 13. Use all wires and diode isolate each.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

illuminated entry problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.