2004 nissan pathfinder, avital 4400

Home / the12volt's Install Bay / Car Security and Convenience / 2004 nissan pathfinder, avital 4400 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ksingh

Copper - Posts: 62

Joined: November 16, 2004

Posted: February 23, 2005 at 8:40 PM / IP Logged

hey whats up guys just installed an avital 4400 in a pathfinder now when i remote start the vehicle it works fine, i had forgot to program the tach so when i did program the tach and i tried to remote start the vehicle it didnt start the dash lights would light up and the parkin lights flash

now what i did after that was i used voltage sense and then it worked fine now after 4 days it doesnt work

can anyone out there please help me out thanks

Kenny

Back to Top

cutter1122

Copper - Posts: 103

Joined: January 16, 2005

Location: Canada

Posted: February 23, 2005 at 8:54 PM / IP Logged

tach: WHITE/ green at ECM, right side of steering column, rear firewall

for the transponder bypass check for PKN2 www.bypasskit.com

Back to Top

ksingh

Copper - Posts: 62

Joined: November 16, 2004

Posted: February 25, 2005 at 1:20 PM / IP Logged

that really dont ans my question nor help me solve my problem

Kenny

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 25, 2005 at 1:32 PM / IP Logged

Have you tried reattaching the tach wire on the tach wire off the truck and releasrning it again ? Try this and post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

ksingh

Copper - Posts: 62

Joined: November 16, 2004

Posted: February 26, 2005 at 8:29 AM / IP Logged

yeah i did try it and it started but the tach needed to be reprogram so when i did pprogram the tach and i tried starting it again it didnt even start all it did was the ignition came on and the parking lights flash but no sign of cranking or anything like that

Kenny

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 26, 2005 at 9:58 AM / IP Logged

Check the output on the starter wire to the motor side of the relay ( if starter kill relay was installed ) for power when cranking. Sounds odd to me that the system doesn't work now ??

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 nissan pathfinder, avital 4400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.