wind noise

Home / the12volt's Install Bay / Car Audio / wind noise (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bombalabom

Member - Posts: 3

Joined: September 28, 2002

Location: Malaysia

Posted: November 04, 2002 at 8:47 AM / IP Logged

hie,i'm a newbies here......

i'm using a kenwood KEC202 2-Way or 3-Way Electronic Crossover only to audiovox amp. the 2X 8' sub. my front are using phase inner 5 1/2 inches and kenwood 1 1/2 tweeter. my rear only have that 2 8' sub... i found that no matter what cable i use,it still got the wind noise when i increase engine RPM..... anyone can help me??? maybe the rem wire i connect wrongly.... i connect the amp rem and kec202 rem together from the pioneer 2450 cd player ..... power supply to kec202 together with the cd player ground to kec 202 together with the cd player before i install my 12' earthquake sub.. i hope to settle down this problem....helps.... information appreciated... thanks

dAnIeL-cF

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 04, 2002 at 9:28 AM / IP Logged

Make sure that none of you RCA wires are running beside your power wires

check your ground wires and make sure the paint is all scrapped off that area that the ground wire is attached to

make sure that the gains on the amp are not maxed out. This will give you whining noises

make sure your ground is less than 3 feet long

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wind noise

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.