Clifford ACG Garage Door Interface

Home / the12volt's Install Bay / Car Security and Convenience / Clifford ACG Garage Door Interface (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Yoshi_D_Dino

Member - Posts: 22

Joined: July 29, 2003

Posted: March 08, 2005 at 10:33 AM / IP Logged

Hiya,

I have a Clifford ACG garage door opener.

Its the generation right before G4.

Question is, how do I delete all the remotes from its memory?

I tried what the manual says to push the remotes out by programming up the 8 slots. I've tried, but it doesn't seem to work.

Is there a trick to this?

Thanks!

Back to Top

Custom_Jim

Copper - Posts: 210

Joined: November 28, 2003

Location: Missouri, United States

Posted: March 08, 2005 at 1:20 PM / IP Logged

You need a throw away remote control and program that one in 8 times. Now the unit will only work with that throw away remote. You bust that one up so it is then no longer useable and your good ones do not work it.

It's one of those things, you need a remote to clear out the other ones.

The only other option is send it back to have the remotes cleared. Chances are they will use a remote they have, program it in 8 times and hopefully that remote will never get close to your reciever.

Jim

1968 Chevy II Nova Garage Find 2012

1973 Nova Custom

1974 Spirit of America Nova

1973 Nova Pro-Street

Back to Top

Yoshi_D_Dino

Member - Posts: 22

Joined: July 29, 2003

Posted: March 08, 2005 at 4:20 PM / IP Logged

Hmmm, I tried that with another remote.

The only thing that happened was that it actived another channel on the receiver. It has 3 receiving channels.

i.e. it was programmed with channel 1, now its shifted to channel 3.

Not sure how this deleting or pushing works.

Back to Top

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: March 09, 2005 at 12:21 AM / IP Logged

Ignore all previous answers.

This is how you do it:

1. Remove power from the unit.

2. Press the blue program, and and KEEP PRESSING IT.

3. Re-connect power.

Done. All remotes have been cleared.

Back to Top

Yoshi_D_Dino

Member - Posts: 22

Joined: July 29, 2003

Posted: March 09, 2005 at 9:40 AM / IP Logged

Hiya OmarR,

That's funny you should say that.

Yesterday I read the manual for the current version, the Directed 519H Garage Door interface.

In there, they detail a Zap Feature. This is the delete all procedure. Which is what you mentioned, press the program button and then power-up. Its deletes all the remotes. Its an undocumented feature missing from the Clifford ACG manual.

Worked like a charm.

Thanks!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford ACG Garage Door Interface

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.