Remote Start on crappy alarm (Nitro)

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start on crappy alarm (Nitro) (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

steveholtam

Copper - Posts: 55

Joined: June 11, 2002

Location: United States

Posted: March 11, 2005 at 10:43 AM / IP Logged

The person who translated the instructions for this Nitro alarm I am installing must have been drunk, and I am wondering if anyone here can make sense of these wires. Here are the wire outs I dont quite understand-

Harness #1

Green Wire - "Air Condition Wire" & "Keyhole on wire", two wires.

Grey Wire - "Connect start engine wire"

Harness #2

Green Wire - "Alternator" (When successfully starting, positive power is output)

As you can see this alarm is lacking inputs. Anyone have a guess on how I would hook up these wires? I have attached a scan of the install instructions which show some of the wires going to the starter or ignition.

I'm still waiting on my PLDATA passkey bypass, but thought I could get these wires hooked up in advance. Also, no starter disable relay yet.

Remote Start on crappy alarm (Nitro) -- posted image.

Back to Top

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: March 11, 2005 at 11:48 AM / IP Logged

The green wire has 2 outputs one that you can use to operate air con - the other you have to connect to the ignition wire that powers up the cars ignition system relays etc and the grey wire goes to the starter motor wire

on the second harness the green wire has to have a 12v + signal when started it says to use alternator wire also you can use the fuel pump wire if the car this system is being fitted to has an electric fuel pump, this wire is used to disable output when the car is started from the alarms relay for remote start.

also when connecting the relay to disable the starter make sure you connect the alarms grey wire to the output of the relay to the starter and not from keyside because if you remote start the car when the alarm is on the car will not start hope this helps let me know if you have any problems.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start on crappy alarm (Nitro)

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.