Power loss to clock, after alarm Install

Home / the12volt's Install Bay / Car Security and Convenience / Power loss to clock, after alarm Install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

juanes

Member - Posts: 3

Joined: March 02, 2005

Posted: March 22, 2005 at 2:26 PM / IP Logged

Maybe someone can help me with this. I just installed a Crimestopper 2way pager alarm with remote start into my 2003 Chevy Silverado Z71. It works great! alarm, remote start and the two way pager, but the only thing I noticed after the install it my Clock looses its time every one and a while. Its very hard to recreate the problem. I think it happens when I turn the truck off with the door open. my stereo will remain on until I open the door, so I am wondering if I need to diode isolate a wire somewhere. I dont even have the door trigger hooked up to the alarm. I am using the dome light as the trigger, and that works just fine for me.. Can anyone suggest a resolution or something I should try to fix it? Thanks!

Juanes

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: March 22, 2005 at 5:57 PM / IP Logged

did you powered all wires brown,orange,yellow,pink,white

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

juanes

Member - Posts: 3

Joined: March 02, 2005

Posted: March 24, 2005 at 2:20 PM / IP Logged

Clock resets to 12:00 come to think of it when I do a remote start the AC fan comes on the the truck starts. but when I turn the key to start it.. the stereo and AC Fan come one. I hooked up the Remote start how the manual said. maybe I am missing a wire.. any suggestions?

Back to Top

juanes

Member - Posts: 3

Joined: March 02, 2005

Posted: March 24, 2005 at 2:24 PM / IP Logged

Forgot to say that the Radio does come on... Only after the truck in running. but not when it preps to start the truck. I hope I am explaining myself okay

Back to Top

Acuraxtasy

Member - Posts: 45

Joined: January 15, 2005

Location: United States

Posted: March 24, 2005 at 10:39 PM / IP Logged

Sounds like you missed an accessory wire, sometimes there is more then 2 thats why it comes on when you turn on the key and not when you R/S the vehicle. As for the radio is it factory of aftermarket? And I would use the door trigger and not the dome light, some dome lights have a delay and if it is too long the alarm ignores it as an open/closed circuit upon arming.

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: March 25, 2005 at 7:49 AM / IP Logged

you need to power the brown wire

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power loss to clock, after alarm Install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.