Boot (Trunk) Release 686

Home / the12volt's Install Bay / Car Security and Convenience / Boot (Trunk) Release 686 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Eeza

Member - Posts: 16

Joined: February 08, 2005

Location: United Kingdom

Posted: March 23, 2005 at 2:42 PM / IP Logged

Hello guys :

Quick question I have a Giordon 686 aoto start alarm I am happy with the features on this bit of kit and the alarm works fine. I would like to use the remote engine start function button to open the boot on my wifes car (UK = bad news for auto starters).

I can get hold of an appropriate solenoid but what about the alarm function.. Can this be done ?

Many thanks Eric

Back to Top

Acuraxtasy

Member - Posts: 45

Joined: January 15, 2005

Location: United States

Posted: March 23, 2005 at 8:22 PM / IP Logged

Do you use the remote start feature of the alarm or not? If you do, you need a second channel to pop it (this is the best way). If you don't you can use the starter output wire it is the only one that shuts off after being energized. Make sure you read your instruction manuel before attempting it some alarms remote start will not work until the tach wire has been learned

Back to Top

Eeza

Member - Posts: 16

Joined: February 08, 2005

Location: United Kingdom

Posted: March 24, 2005 at 3:11 AM / IP Logged

Ok thanks for that I will have a look later on today Cheers...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Boot (Trunk) Release 686

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.