Alpine Radar Sensor Connection

Home / the12volt's Install Bay / Car Security and Convenience / Alpine Radar Sensor Connection (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

71machone

Member - Posts: 2

Joined: March 18, 2005

Location: United States

Posted: March 25, 2005 at 9:27 AM / IP Logged

I have an Alpine SEC-8028 alarm system and would like to connect an Alpine SEC-8345 radar sensor to it. The wiring on the radar sensor is:

YEL/GRY (Radar Power), GRY/BLU (Radar Control), GRY (Radar Trigger), BLK (Ground).

I have the ground figured out but where do the radar control, radar trigger and radar power wires connect on the 8028? I'm very new at this and any help is greatly appreciated. Thanks.

71Mach

Back to Top

moshpitmickey

Member - Posts: 43

Joined: March 23, 2005

Location: United States

Posted: March 28, 2005 at 7:53 PM / IP Logged

Radar Power is 12 volts constant.

Radar trigger will hook up to a - trigger input on the alarm.

Radar control should be hooked to the blue/white wire from the alarm. This wire should turn the sensor on when the alarm is armed.

moshpitmickey

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine Radar Sensor Connection

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.