Clifford RSX3.5 Sensor Questions

I had this unit installed professionally however i am courious to know. I have a shock sensor which came with the unit and had a prox sensor insatlled at the same time of installtion. now on the remote it has sensor 1 and 2 however no matter what triggers the warning or full siren it will only say sensor 2 has activated. is this normal? what i would like is for the shock sensor to be sensor 1 and prox to be sensor 2 . is this possible? Eclipse 5435

US Amps Merlin MD2 x 2

US Amps Merlin MD42

Kicker Solo X 18"

MB Quart QSD216 x 2

nobody knows huh?Eclipse 5435

US Amps Merlin MD2 x 2

US Amps Merlin MD42

Kicker Solo X 18"

MB Quart QSD216 x 2

you might want to ask the installer to program your remote for sensor 1 to appear.

depends on how it was wired...if they tapped the prox sensor into the shock sensor wiring then no...but you can hook it to the Blue trunk trigger if it's not being used and the prox sensor will appear as zone 4......Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

might say sensor two if he used the same channel with blocking diodes but i don't know why he would