the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 oldsmobile alero remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
absolute_honda 
Member - Posts: 12
Member spacespace
Joined: November 09, 2003
Location: United States
Posted: April 03, 2005 at 10:41 PM / IP Logged  
I was putting a remote starter on a 2003 oldsmobile alero and after putting in the pass 2 bypass and setting it at the right impedance, I hooked the rest of the wiring up.......  now for some reason the car will not start even with the key so i disconnected all the wiring and hooked everything up like stock and it still wont crank.   ANYONE WITH HELPFUL INSIGHT???? I also checked all fuses.  ????????????????????????
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: April 03, 2005 at 10:47 PM / IP Logged  
Ok, what is the security light doing?
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
absolute_honda 
Member - Posts: 12
Member spacespace
Joined: November 09, 2003
Location: United States
Posted: April 03, 2005 at 11:26 PM / IP Logged  

didnt even think of that

where is that located and what should i do - i tried disconnecting the battery and i even jumped the starter solenoid but when i jump the solenoid even with the key in the run position it only turns over and doesnt start???

auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: April 04, 2005 at 12:25 AM / IP Logged  
It was passock.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
absolute_honda 
Member - Posts: 12
Member spacespace
Joined: November 09, 2003
Location: United States
Posted: April 04, 2005 at 12:57 AM / IP Logged  
got everything - customer had sh*tty omega pass2 bypass and the reostat was off by 0.1Kohm - got it working thanks for the help

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer