01 Ford Taurus

Home / the12volt's Install Bay / General Discussion / 01 Ford Taurus (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ford18

Member - Posts: 3

Joined: September 14, 2004

Location: United States

Posted: April 04, 2005 at 5:46 PM / IP Logged

i had a simple question.. I have an 01 Ford Taurus with the 3.0 vulcan engine.. and i was gonna run an amp power wire through the fire wall to power a 4 channel amp for my speakers and i already have an aftermarket pioneer deck in there.. i just needed to know of any safe spots to drill or if there is a grommet i am missing.. cause there is the brake booster and the abs stuff and the power steering rack that i dont wannna tag when i am drilling.. so has anyone done an 01 taurus before?

Rbv

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: April 04, 2005 at 8:04 PM / IP Logged

On vehicles that give me a hard time, I just cut a slit in the boot where the steering shaft enters.

My ex once told me I have a perfect face for radio.

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 05, 2005 at 12:09 AM / IP Logged

Yeah, I drilled my 01 Taurus just directly under the brake pedal linkage from the inside. Pushed a coat hanger through until I saw it from the engine side.

Back to Top

ford18

Member - Posts: 3

Joined: September 14, 2004

Location: United States

Posted: April 05, 2005 at 11:02 PM / IP Logged

how did you drill and not tag your brake booster?

Rbv

Back to Top

slow_hoe2001

Member - Posts: 42

Joined: May 09, 2004

Location: United States

Posted: April 10, 2005 at 7:04 PM / IP Logged

no need to drill dude. i have a 01 taurus ses and i just pulled down the fender well plastic crap on the driver side and there is a boot for what you want in there. just b cautious of the spring when u run your wire. i tied mine up w/ zip cord and drilled it to the body. hope this helps

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 Ford Taurus

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.