Clifford programming question

Home / the12volt's Install Bay / Car Security and Convenience / Clifford programming question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mark9841

Member - Posts: 11

Joined: December 02, 2004

Location: United States

Posted: April 05, 2005 at 1:35 AM / IP Logged

I have installed a Clifford Intelliguard 700 IQ on one of my vehicles. In the programming features table there is an option at column 5, row 6, that says "High/Low: on/off".

I am also installing an Intelliguard 800 on another vehicle, and I see this same option in the programming features table at column 3, row 5, for this alarm.

Does anybody know what this feature does?

mark9841

Member - Posts: 11

Joined: December 02, 2004

Location: United States

Posted: April 07, 2005 at 2:33 AM / IP Logged

C'mon, help me out here! I see alot of you have looked at this post, but no replies. Somebody must know what this programming option does! It's "High/Low : on/off" Please help, thanks.

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: April 07, 2005 at 6:32 AM / IP Logged

i don't find the programing page for 700 or 800 i see the 750 i don't know sorry

how own your mind, control your life.

MECP certified. always use a DMM

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: April 07, 2005 at 6:45 AM / IP Logged

http://www.directechs.com/techtips/pdfs/resources/security/clifford_techtips/49000313.pdf

hope, it helps u good luck just read carful

how own your mind, control your life.

MECP certified. always use a DMM

mark9841

Member - Posts: 11

Joined: December 02, 2004

Location: United States

Posted: April 07, 2005 at 10:54 PM / IP Logged

Thanks, got it. The answer is in the Techtips paper.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford programming question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.