alarm manual on/off switch?

Home / the12volt's Install Bay / Car Security and Convenience / alarm manual on/off switch? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shkeel

Member - Posts: 25

Joined: February 23, 2005

Location: United States

Posted: April 07, 2005 at 2:40 PM / IP Logged

I have a 94 camaro z28, that i got not too long ago from a semi-private dealer. I was told that the car had an alarm, and it came with a keyless entry button. But ive tested it before the alarm doesn't arm when I lock the doors from the button? I was questioning whether it was just a keyless entry type of button or a stock alarm, but when i start the car the security light flashes. I had a mechanic look at it and he said there might be a hidden manual on/off switch for the alarm itself. I've installed some stereo equipment and when i took the dash apart i did some searching and i have yet to find it. I was just wondering if anybody knew if it actually had a switch or am I gettin BS'ed by the dealer?

Back to Top

shkeel

Member - Posts: 25

Joined: February 23, 2005

Location: United States

Posted: April 07, 2005 at 3:02 PM / IP Logged

I also forgot to add that the OEM keyless entry remote just recently stopped working. It sorta like faded out like it had a dieing battery, so I put a new battery in it and it doesnt work at all now? I thought i got the wrong battery so i got another one and it did the same thing. The keyless entry worked like a charm when i first got it and then it slowly got worse, I had to push the button harder, or get closer to the car.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: April 07, 2005 at 8:34 PM / IP Logged

If U have the STOCK Factory Remote, ther are Aftermarket & Dealer Alarms that will Arm / Disarm from the Factory Remote. U could look for a Valet Button / Switch or look under dash for any Add-On wiring.

On your Remote problem: U may want to look for a 12 Volt shop that has a Frequency Meter to check your Remote RF Signal

Program Remote:

Locate DATA Link Connector on bottom of Driver Dash, Right of Steering Column.

Hook Jumper wire to PIN G ( BLACK/ White wire ) to Ground. Doors should Cycle in 1 - 3 seconds.

Press ANY Button on Transmitter. Doors should cycle for confirmation. Program other Remotes also.

Remove Jumper wire to exit programming.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm manual on/off switch?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.