ohm's question

Home / the12volt's Install Bay / Car Audio / ohm's question (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 12, 2005 at 10:01 PM / IP Logged

If you: 1. have both woofers in one enclosure - wire them together as Rob showed above and connect to one of each terminals of the amp. The other two terminals will not be used. You can tag them "do not use" or tape them off if you wish, for a personal reminder that the ohm load on the amp will be exceeded if you connect a load to them.

2. have the woofers separated into two different enclosures, you would use both sets of terminals on the amp. The load would be 8 ohm to each set of terminals, combined within the amp for a total 4 ohm load on the amp. It's the same either way.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

john_nading

Member - Posts: 6

Joined: April 12, 2005

Location: United States

Posted: April 12, 2005 at 10:17 PM / IP Logged

i have them in seperate enclosures.. so option 2... thanks i think i understand it now... thanks...

if you want me to give u msn messenger, ask

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ohm's question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.