Wiring the Starter - Correct?

Home / the12volt's Install Bay / Relays / Wiring the Starter - Correct? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Un0turb0-wp

Member - Posts: 6

Joined: April 11, 2005

Location: South Africa

Posted: April 13, 2005 at 3:27 PM / IP Logged

IS this the correct way to wire the starter motor on the car for a push button start? Thanks in advance

Wiring the Starter - Correct? - Last Post -- posted image.

"Im kept in places by G-Forces not Seatbelts"

Back to Top

Hoptup32

Copper - Posts: 87

Joined: December 25, 2004

Location: United States

Posted: April 13, 2005 at 9:35 PM / IP Logged

I'm not sure that the jumper wire from 86 to 87 will keep enough current flowing to terminal 86 to keep the relay activated. You would have to test it to see if it will work.

I would rewire it like this if it was my vehicle.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 13, 2005 at 9:40 PM / IP Logged

Well, I would go with the second one but would go to the ign harness for the power. After all it is what supplies the power for the starter anyways.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Un0turb0-wp

Member - Posts: 6

Joined: April 11, 2005

Location: South Africa

Posted: April 14, 2005 at 1:40 AM / IP Logged

Thanks for the info so far..

Aurex, so do u mean you would rather have the switch connected to the the ignition pin instead of the ground?

"Im kept in places by G-Forces not Seatbelts"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring the Starter - Correct?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.