Audi A3, Compustar 2WFM-AS

Hi I am putting a Compustar 2WFM-AS (alarm with remote start) into an audi A3 UK model...is a 3 door hatchback...i am having the following problems: 1. The trunk input from the car is +ve but the sensor from the alarm is -ve...how can i change the polarity? 2. I can only find the passenger door trigger wire which is BROWN / white....cant find the driver side trigger wire? 3. How do i connect the central locking to the car? thanks in advance! Sam

Sorry, I don't have UK info, but here is answer to # 1:

1. The trunk input from the car is +ve but the sensor from the alarm is -ve...how can i change the polarity?

 

Try: https://www.the12volt.com/relays/page1.asp

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Is there any one year for the make of this car ? anyway there it is for a 1997 one .... http://www.directechs.com/directwire/wire_body.asp?action=select&yr=3620&product=Remote Start Glad to serve you :-)

You will probably need to go into each front door for the door triggers.... they will be BROWN / white either at the courtesy light in the door panel, or in the harness coming from the latch assembly. As far as locks go, you will need to use the key in the door cylnder, and test for the lock and unlock wires. They will also be in the harness that heads towards the striker. Gus PS: I can't wait to get an A3 TDI in Canada.... someday!Wherever I go, that is where I end up......

the driver door trigger should be in the kick panel or in the door if it's on the latch itself.double check with your digital meter. the locks should be there also.