shaved door solenoid

yea it's easy, just use a relay for it, does the solenoid have a regular + - hookup? you could probably use a door lock relay set up to do it.. if you really need a diagram i'll draw one up but it's simple, put the door unlock output to 86, positive 12v to 86 and 87 and then put your output for the sol. to 30,, and ground the other side of the sol.. best thing to do if you aren't using aux output is to find a system with drivers priority, then the alarm will have two unlock outputs, one that will trigger all time and one that will trigger only after the first one already has, this way you can still disarm and not pop your doors, OR you can use it to do drivers and pass...