installing a starter disable w/ turn lights

Home / the12volt's Install Bay / Car Security and Convenience / installing a starter disable w/ turn lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Guss

Member - Posts: 15

Joined: April 06, 2005

Location: United States

Posted: April 26, 2005 at 11:13 AM / IP Logged

Hi, I want to install a starter disable in my car and I want to use my turn lights. I know I have to use the third diagram of Passive Starter Kill, just I am not sure what to connect where it says: to horn positive, and from horn relay(+).

I do not if it's sound like dumb question, but I haven't figured out exactly what that means.

Thank you, I would appreciate if you can help me

Guss

Back to Top

Guss

Member - Posts: 15

Joined: April 06, 2005

Location: United States

Posted: April 29, 2005 at 12:59 PM / IP Logged

it is just a starter kill, i do not understand you. I want to use the layout where you use four relays( https://www.the12volt.com/relays/page2.asp), just that i don't know how to figure out what to connect where it says: to the horn positive and where it says: from horn relay(+). if anyone can help me i would appreciate it

thank you

Guss

Back to Top

Guss

Member - Posts: 15

Joined: April 06, 2005

Location: United States

Posted: April 29, 2005 at 2:53 PM / IP Logged

sorry, I don't get it straight. if output is possitive I can connect it to #85 and connect #86 to ground. if it is negative can i connect them in the same way? How do I figure out if the output is possitive or negative?

thank you

Back to Top

Guss

Member - Posts: 15

Joined: April 06, 2005

Location: United States

Posted: April 29, 2005 at 2:54 PM / IP Logged

sorry, I don't get it straight. if output is possitive I can connect it to #85 and connect #86 to ground. if it is negative can i connect them in the same way? How do I figure out if the output is possitive or negative?

so, what is the other layout used for?, the one with four relays

thank you

Back to Top

Guss

Member - Posts: 15

Joined: April 06, 2005

Location: United States

Posted: April 29, 2005 at 3:11 PM / IP Logged

thank you, if output is negative what do i connect on the other one?

Back to Top

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: April 30, 2005 at 11:33 AM / IP Logged

WHAT!......WHAT!.......WHAT!.......okay bro you want to use the lights to turn your relay on to start your car.then your writing about a horn with the four relay set up.PUMP YOUR BRAKES MAAAAAAN! What relay set up do you want to use bro?your acting like a girl in a clothing store. make up your mind and lets go.

Back to Top

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: May 01, 2005 at 1:01 AM / IP Logged

excuse me bobk but this guy does not write like he is okay.the relay diagram on the forum has a picture along with a simple explanation. you even wrote do the math.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

installing a starter disable w/ turn lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.