Alpine amp model 3006

Home / the12volt's Install Bay / Car Audio / Alpine amp model 3006 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sookesquatch

Member - Posts: 2

Joined: April 29, 2005

Location: Canada

Posted: April 29, 2005 at 3:55 PM / IP Logged

I am looking for a wiring diagram or a schematic for an alpine power amp, model 3006, 18w +18w.

Can anyone help me out? Thanks

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: April 29, 2005 at 4:49 PM / IP Logged

This is really old school, but I think I remember it this way. There should two yellows or a yellow and a white. These are both 12volt constant. Red is 12 volt switched. Black is ground. LF + is GREEN/ YELLOW, LF- is GREEN / WHITE, RF + is grey / YELLOW, RF - is grey/white. It should have an 8 pin DIN input. You only need four pins. On the input 12:00 is signal ground, 1:00 is signal input left, 11:00 is signal input right and 3:00 is remote turn on. Use your volt meter to find which wires in the DIN cord match the pins on the input.

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: April 29, 2005 at 8:22 PM / IP Logged

Just goes to show you how good Alpine Amps can be if this old school amp is still around kicking.

Chris

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

sookesquatch

Member - Posts: 2

Joined: April 29, 2005

Location: Canada

Posted: April 30, 2005 at 1:07 PM / IP Logged

Thanks , This unit is on a sailboat that I just bought, and it has decided to start blowing a fuse on one of the 12 volt constant lines when the cd deck is turned on. I will check it out when I am out there this weekend.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine amp model 3006

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.