the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

changing my install, recs?


Post ReplyPost New Topic
< Prev Topic Next Topic >
customsuburb 
Gold - Posts: 1,813
Gold spacespace
Joined: January 17, 2004
Location: United States
Posted: May 02, 2005 at 5:28 PM / IP Logged  

I wouldn't try wiring your mids and tweets to seperate channels..yet.

JL's new woofer is the W1v2 which is supposed to replace the W0 line of subs. I have listened to the 12s and they are great subs for the money. One 12 would work well bridged to the rear channels of the 300/4. The 12" W1v2's suggested box size is 1.25 cubic sealed.

If you want to go to the next level a single JL W3v2 12" would be nice. The Infinity kappa and Alpine Type R subs are nice also.

check it out... http://www.jlaudio.com/press/W1v205.html

The Cerwin vega subs are good subs also but they would work better on a more powerful amp. You can find really good prices on them at   www.thezeb.com

Drewt 
Copper - Posts: 183
Copper spacespace
Joined: January 04, 2005
Location: United States
Posted: May 02, 2005 at 6:07 PM / IP Logged  
Try out Infinity Kappa Perfect 10.1 (or 10.1d if you're only using 1), and wire it up to an Alpine MRD-M301 amp. Amp is awsome, speakers are awsome. If you put it in a decent box, then I'll guarantee you won't be dissapointed!
-Drew
racer427 
Silver - Posts: 381
Silver spacespace
Joined: August 04, 2004
Location: United States
Posted: May 02, 2005 at 6:21 PM / IP Logged  

Wow, I didn't realize that JL was bringing the W1 back, the specs look better than the old W1's. I would also agree with the Infinity's. As I have stated in the past, they are actually very impressive sub's.

Also, if you are budget minded, look into the MTX MXA 10's or the MTX 5500's. Great bang for the buck.

Chris

Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer