Does this box need bracing?

Home / the12volt's Install Bay / Car Audio / Does this box need bracing? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jvee

Member - Posts: 26

Joined: September 16, 2004

Location: United States

Posted: May 03, 2005 at 9:18 AM / IP Logged

I am finally ready to build my first box. I waited much too long for the custom one I wanted to go into production and I am not waiting any longer.

It is a sealed single truck style box going into a four door compact. The angled side is going to be against the back seats and the flat side is going to be facing the rear with speaker mounted in that location. Outside dimensions are; Length = 23" - Height = 14.5" - D1 = 6" - D2 = 11.5". Will be built with 5/8" MDF. Speaker is Alumapro Alusonic 12". I believe the sub should do well with a volume of 1.0 - 1.2 cubic feet. It is going to be powered by Hifonics Series VIII Odin bridged to 240x1.

All advice appreciated.

Back to Top

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: May 03, 2005 at 9:54 AM / IP Logged

All boxes need some sort of bracing. I'd say put some in there.

Paul

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Does this box need bracing?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.