Amp for SE10

I just bought an SE10 from Resonant Engineering and was wondering what amp I should get. It is DVC 4ohm, 600w RMS, 1200w Peak.

Thanks,

Warren

I had Cheetos and wine for dinenr.

Depends on the box you plan to run with. A large ported box? You shouldn't get an amplifier that big. A small sealed box? Go ahead and get an amplifier that does 600w @ 2 ohms, if you really feel like it. Even with a small sealed box, anything in the 300-600w range will be fine. The max 3db difference between 300w and 600w will barely be noticable. New Project: 2003 Pathfinder

I like JBL, MTX, and Memphis for bang/buck right now. Brands like Eclipse, Zapco, Xtant are always fantastic + reliable, although a little more expensive. I'd get a mono class d that puts out 300w+ at 2-ohms. Pricy but clean and honest power option: http://www.cardomain.com/item/XTAXTANT61 Super fantastic deal b/c of MTX's new line: http://www.cardomain.com/item/MTX421D Very nice JBL: http://www.cardomain.com/item/JBLGTO6011II Not the one I'd pick, but it'd certainly work: http://www.cardomain.com/item/PHOR501 Anyway, good luck. Let me know which way you're leaning / pick. New Project: 2003 Pathfinder

Why wouldn't you get a amp that would push all 600 watts if that is the RMS rating?I had Cheetos and wine for dinenr.