’03 Dodge Stratus alarm/keyless

If the switch is working and if you haven't put any negative ground on to the door lock wire. Nothing is broken or fried.   You may just not have gotten the correct resistor for it to work. Play with different value resistor and see if that helps.    Be careful whose advice you buy, but be patient with those who supply it.

No, I even diconnected everything I hooked up and the same thing.... switch works(both doors), 17 Mph, but it still doesn't lock the doors. As I mentioned earlier, I hear it clicking at the BCM, but the door locks won't engage. I pulled the door panel to see if I could test the actuator but it's so deep in the door itself.... I can't get to it. Oh this sucks. I finally get the alarm to work and now this. And I've tried so many relay diagrams that was said to be for (my vehicle) it's no wonder it's fried. So I can't remember if I did put a negative on the door lock wire. But I do thank you pencil for giving me the correct schematic. If you or anyone have any furthur ideas please please please let me know. Thanks. At the arcade they have this game where you put in a dollar and you win 4 quarters!! I win every time!!!!