remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / remote start problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Dohoa

Member - Posts: 15

Joined: July 01, 2003

Location: United States

Posted: May 07, 2005 at 6:38 PM / IP Logged

I am installing the Omega max security and remote start sytem to my 2000 Toyota Celica .everything work fine but the remote start engine has problem my car started only one or two minutes then shut down itself and re restarted two times and shut down. I use tach less . Please help Thank you very much.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: May 07, 2005 at 7:44 PM / IP Logged

U might want to "REPROGRAM" Unit to TACHLESS..........

Enter Programming Mode

Press Valet 34 times and Press LOCK

Or do a DEFAULT Program

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Dohoa

Member - Posts: 15

Joined: July 01, 2003

Location: United States

Posted: May 08, 2005 at 7:20 PM / IP Logged

Thank you for your responsed. I have tried to enter the program mode but not working .Do you think because I use one Ignition wire from the alarm split to two for ignition 2 instead of using a relay. The problem is unable to enter the program mode..

Back to Top

bighands23

Member - Posts: 1

Joined: May 09, 2005

Location: United States

Posted: May 09, 2005 at 1:30 PM / IP Logged

i have bought a magnum car alarm, and the remote start works but it doesnt start the car. all dash lights come on but starter will not engage. then i can start the car with the key and turn it back off but the alarm will keep it running. so the alarm thinks it started the car but it didnt and i can turn the car off with the alarm keypad, so its gotten me confused. help please

Ajah Fowler

Back to Top

riceman

Copper - Posts: 109

Joined: October 14, 2004

Posted: May 09, 2005 at 2:26 PM / IP Logged

just wondering did you guys use a relay to isolate the accessory wire because if you dont it can cause problems.

Back to Top

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: May 09, 2005 at 5:37 PM / IP Logged

factory immobilizer?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.