Eclipse BEC104

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Eclipse BEC104 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Lizardking

Copper - Posts: 184

Joined: August 23, 2004

Posted: May 08, 2005 at 5:04 PM / IP Logged

Made a big boo boo!! I installed my back up camara today and when running my cable which is a two piece cable the connectors got stuck on something. I tried forever it seemed to work it loose with no success. Anyway I ended up cutting the cable and soldered it back together was this okay to do? I never had to solder something like that before and I'm really good with soldering but not sure if you can solder video cable..

Thanks

Wires: Black, Red, Yellow and white (which was the outer insulation wire).

Eclipse "Approaching Perfection"

Back to Top

Lizardking

Copper - Posts: 184

Joined: August 23, 2004

Posted: May 08, 2005 at 9:51 PM / IP Logged

I found out it doesn't matter at least I hope!!

Eclipse "Approaching Perfection"

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: May 08, 2005 at 10:53 PM / IP Logged

As long as it works and you arent getting any goofy interference than I guess you are good to go

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Lizardking

Copper - Posts: 184

Joined: August 23, 2004

Posted: May 09, 2005 at 3:28 PM / IP Logged

I figure the two connectors that broke, all they where is crimped.. So I should have no problems....

Eclipse "Approaching Perfection"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Eclipse BEC104

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.