will alarm disarm if door lock popped?

Home / the12volt's Install Bay / Car Security and Convenience / will alarm disarm if door lock popped? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: May 16, 2005 at 11:10 PM / IP Logged

Hello everyone, I have a question, if you get an aftermarket alarm/rs put on your vehicle (04 yukon denali), can it be disarm from the driver's door lock like it can with the factory. What I mean is they are getting into the cars by popping the driver's lock and disarming the factory arm. On this car you use the 456G to hook up the aftermarket alarm. With that said can the aftermarket alarm be bypassed by popping that driver's door lock or does it actually see the door is open like you have door pins? The aftermarket alarm is automate am7. Thanks in advance!

electronics

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: May 16, 2005 at 11:23 PM / IP Logged

If you don't use the interface, you can definatly make it do it.

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Back to Top

tcool

Copper - Posts: 100

Joined: September 06, 2003

Location: United States

Posted: May 18, 2005 at 12:32 PM / IP Logged

Your aftermarket alarm will arm and disarm your factory alarm. Your factory alarm cannot arm or disarm your automate alarm. Therefore, if thieves are breaking into the door to disarm the factory alarm, it will not affect your aftermarket automate alarm- it will still go off.

bzzzzttttt

Back to Top

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: May 18, 2005 at 10:17 PM / IP Logged

Thanks for the response oonikfraleyou, bob k, and tcool. If I'm understanding this right, even if they would pop the driver's door lock the aftermarket alarm is still active and will sound when the door is open. Even if you use the 456G interface? I thought you would have to go directly to the door trigger wires in the bcm from the aftermarket alarm? I'm just trying to make sure I'm understanding this right. Thanks again!

Electronics

electronics

Back to Top

Uniqueauto

Copper - Posts: 73

Joined: January 04, 2005

Location: United States

Posted: May 18, 2005 at 11:49 PM / IP Logged

Thats right, the aftermarket alarm will still sound regardless.

Installer/Owner

Double check twice Install once!

Wires are my Best Friends

Back to Top

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: May 19, 2005 at 11:09 PM / IP Logged

Thank you very much on the info!

electronics

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

will alarm disarm if door lock popped?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.