the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

best way to strip a wire without cutting


Post ReplyPost New Topic
< Prev Topic Next Topic >
hoosier122 
Member - Posts: 1
Member spacespace
Joined: June 07, 2005
Location: United States
Posted: June 07, 2005 at 2:16 AM / IP Logged  
What is the best way to strip a "section" of wire? 
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: June 07, 2005 at 8:50 AM / IP Logged  

Are you referring to a section out of the middle or the end?

I use a Flat Razor Blade.

Go around real easy so you don't cut the wire.

Do this around the length front and back.

Then cut a streight slit between the two and bend the wire so the edges pop up.

Then peal out the section you want to remove.

best way to strip a wire without cutting - Page 2 - Last Post -- posted image.

John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: July 07, 2005 at 11:12 PM / IP Logged  
that last technique is great when all you have is x-acto. you don't cut to the wire, except for the cut along the length - it doesn't damage any of the strands to cut along them, only against them. then cause you have a cut around the wire, when you 'rip it off' it USUALLY rips around hte little guide you make
ONLY PROBLEM with stripping like this you can't get shrink tube over the joint, and i hate electrical tape more than those damn T-Taps. 3 years later - electrical tape is waorn away, shorts out and BAM! you have crap. lol. shrink tube is gods gift... right between pretty women and german engineering.
nowlater123 
Copper - Posts: 61
Copper spacespace
Joined: June 24, 2005
Location: United States
Posted: July 15, 2005 at 11:46 PM / IP Logged  
I bought this wire stripper at a hardware store, and honestly it is worth i'ts weight in pure gold. It makes any wiring job go by so much quicker.  best way to strip a wire without cutting - Page 2 - Last Post -- posted image.
Kenwood all the Way!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 1, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer