Autowatch 345clam problems.

Home / the12volt's Install Bay / Car Security and Convenience / Autowatch 345clam problems. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davidhor

Member - Posts: 1

Joined: May 28, 2005

Location: Malaysia

Posted: May 28, 2005 at 10:08 PM / IP Logged

Hey there, i have a Murano with Autowatch 345 installed. i seem to have problem with the lock/unlock part.

i wired the lock/unlock to the factory keyless signal's lock/unlock wire but then whenever i lock or unlock the door in the car "using the central locking switch" , it still disarm .. any ideas ? .

Back to Top

Autowatch Oz

Member - Posts: 5

Joined: June 06, 2005

Location: Australia

Posted: June 06, 2005 at 10:42 PM / IP Logged

If your car's indicators flash when you lock and unlock the car by remote you need to connect thesignal wire(brown) to the indicators.This means the alarm has to see the lock and unlock pulses as well as the indicator flash.Let me know how you go.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Autowatch 345clam problems.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.