My second fiberglass project

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / My second fiberglass project (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: June 04, 2005 at 2:38 PM / IP Logged

Here is my second fiberglass incloser. I made a box for a 12" sub that will fit in a Scion Tc.

This picture is the start mold inside the car

Next picture is the sub ring supported by 7/16" dole rod

My second fiberglass project -- posted image.

next is a picture of the box with MDF ring

My second fiberglass project -- posted image.

The next picture is of the box wrapped in fleece

My second fiberglass project -- posted image.

Next picture is just a different angle

My second fiberglass project -- posted image.

Next picture is of the box with it fiberglassed and has the 12" sub in it

My second fiberglass project -- posted image.

Next picture 2 pictures are of the box fiberglassed and bondoed right before I covered it to go in the care

My second fiberglass project -- posted image.

In a couple of days I will have a picture of the finished box in the car and pictures of the amp rack also. stay tuned to the next big project i am going to be working on its going to be awesome.

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: June 06, 2005 at 1:23 PM / IP Logged

I am adding more pictures. These pictures are for the amp rack on the other side of the car.

My second fiberglass project -- posted image.

this next picture is of the mold all cut and the dowel rods in place

My second fiberglass project -- posted image.

the next picture is of the MDF in place and attached to the dowel rods

My second fiberglass project -- posted image.

and the last picture of the amp rack is part of it right this second is covered in fleece

My second fiberglass project -- posted image.

these next pictures are of a dash kit I am smoothing out for a 2004 xterra the dash kist for the radio had a little cubby I just couldn't use so I covered it and I am in the process of smothing it out and getting ready for paint.

My second fiberglass project -- posted image.

So here is whats up for right now. more is on the way like the amp rack finished and the dash kit. Also I have a big project I am starting on June 13th . Drop me a line and let me know what you think.

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: June 06, 2005 at 7:57 PM / IP Logged

looks pretty darn good! what kind of equipment is goin in there? also what is this huge project you are about to start?

blah blah blah blah

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: June 06, 2005 at 8:50 PM / IP Logged

Why thanks. The guy I am doing the box for has an MTX 12 and the amp for the amp rack is an MTX thunder 504. and for the dash kit an Alpin cd-9825 deck is going into that which is going into my xterra. and for the big project I will give a sneak peak on what is started I am just finishing with the glass work.

My second fiberglass project -- posted image.

so I am going to be doing the glass work on this monster and I will keep everyone posted with pictures on the progress. Oh yeah this is in a scion XB

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 06, 2005 at 11:34 PM / IP Logged

The pic definately a monster!

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 06, 2005 at 11:34 PM / IP Logged

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: June 07, 2005 at 5:19 AM / IP Logged

Auex,

Thanks for reposting the picture sometimes when I post pictures they get all messed up. but thanks

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: June 08, 2005 at 9:21 AM / IP Logged

All those subs running on those tiny ports? Everything else is nice bro, I am doing a entire trunk build, am going to start this afternoon! Everything you have done is awesome! Good job!

Duke Duke

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: June 08, 2005 at 10:25 AM / IP Logged

Thanks alot. I didn't build the box, and from my understanding the diameter of the ports are small as we can see but the length inside of the box is were the made up for it. I don't know for sure though. But hey thanks and I love doing this becuase it keeps me busy

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: June 08, 2005 at 10:51 AM / IP Logged

How does it sound?

blah blah blah blah

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.