amp question

Home / the12volt's Install Bay / Car Audio / amp question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Redstorm3

Member - Posts: 38

Joined: May 07, 2004

Location: United States

Posted: June 07, 2005 at 8:34 AM / IP Logged

I just want to double check my wiring:

If i have 2 12" DVC 4 ohm (Infinity 1242w) and i wire them in series then parallel which would give me a 4 ohm load on my Kenwood KAC-7201 which at 4 ohms bridged gives me 430 watts does this sound right? and would these subs handle that ?

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 07, 2005 at 10:17 AM / IP Logged

Your wiring sounds right to me. The subs handle 300 watts each (thermally.) What kind of enclosure are you using? A ported enclosure might drop their power handling down to about 240 watts (each.)

Support the12volt.com

Back to Top

Redstorm3

Member - Posts: 38

Joined: May 07, 2004

Location: United States

Posted: June 07, 2005 at 10:19 AM / IP Logged

I have a sealed q-logic box

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.