the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

distribution block needed for capacitor?


Post ReplyPost New Topic
< Prev Topic Next Topic >
dannyboi 
Member - Posts: 18
Member spacespace
Joined: June 07, 2005
Location: United States
Posted: June 08, 2005 at 4:13 PM / IP Logged  

I was wondering if a distribution block was needed for the install of a capacitor?

"the greatest skill of a person is a skill unknown"
hightek 
Copper - Posts: 223
Copper spacespace
Joined: July 26, 2004
Location: United States
Posted: June 08, 2005 at 4:50 PM / IP Logged  
i've never installed a cap before but i don't think you need a distro block. you wire the ground and to the battery. then the amp is wired to the cap. i'd do more research, since i've never actually done it before
hightek
alpine cda-9827
12" Brahma
Eclipse DA6213
and still working on it
jussam 
Copper - Posts: 78
Copper spacespace
Joined: June 03, 2004
Location: United States
Posted: June 08, 2005 at 6:15 PM / IP Logged  

well if you want to have a clean look with your wires check this out. it go directly on to your cap there are many ways to achieve a clean finish look  or just  more ouputs if that is what you want

honestly you don't really need it

distribution block needed for capacitor? -- posted image.

2-alpine amp mrv-f545 4ch amp
polk audio 6 1/2 frontdoor w/alpine center speaker
polk audio 6 1/2 rear w/8"polk sub
2-12" alpine X type sub
2-alpine mdr-1005 amps

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, February 2, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer