Having trouble entering programming mode

Home / the12volt's Install Bay / Car Security and Convenience / Having trouble entering programming mode (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cyoonak

Member - Posts: 16

Joined: November 02, 2002

Location: United States

Posted: November 21, 2002 at 9:29 PM / IP Logged

I installed a CS2011 Remote Start on my car, and I'm having trouble entering its programming mode. I have the ign ON and pushed the button five times, but i'm not getting a response. I was thinking of going to radio shack and buying a new push button switch to replace it. any other ideas?

what type of switch would i even look for?

Thanks

Back to Top

alarmpro

Copper - Posts: 110

Joined: September 17, 2002

Location: United States

Posted: November 21, 2002 at 9:36 PM / IP Logged

Some require that the door be open in prog mode... Also test the switch before you buy another one!!!

Back to Top

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: November 21, 2002 at 10:01 PM / IP Logged

Make sure that the door trigger wire is connected properly. As alarmpro said some alarms require that the door be open in order to enter program mode.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Back to Top

Search for other posts by Sound Pressure

skerr

Copper - Posts: 52

Joined: November 08, 2002

Location: United States

Posted: November 22, 2002 at 6:23 AM / IP Logged

The cs-2011 requires the hood to be open to program, or to ground the blue hood pin wire if you don't have it hooked up.

Shawn

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Having trouble entering programming mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.