setting up my system

Home / the12volt's Install Bay / Car Audio / setting up my system (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Busta1121

Member - Posts: 9

Joined: June 20, 2005

Location: United States

Posted: June 21, 2005 at 6:27 PM / IP Logged

the subs are 4 ohms and the amp is 4 ohm stable bridged i believe. It sucks cause the subs sounded much better when i hooked it up

dwarren

Platinum - Nominee - Posts: 1,811

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 03, 2004

Location: California, United States

Posted: June 21, 2005 at 6:29 PM / IP Logged

Right, but you will fry the amp by putting a 2 ohm load to it, so your orginal hook-up of each speaker to a terminal is the way to go for now.

Busta1121

Member - Posts: 9

Joined: June 20, 2005

Location: United States

Posted: June 21, 2005 at 6:39 PM / IP Logged

so bridging the amp and hooking up 2 40hms speakers makes it 2 ohms? what if i hook up to 2 2 ohms speakers?

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: June 21, 2005 at 6:54 PM / IP Logged

I looked up the amp and it is 75x2 @ 2 ohms stereo

It is 150 bridged at 4 ohms.

I assume you cannot return any of this so run it in stereo.

I suppose you can run two 2 ohm subs in stereo. That's what it says it's capable of.

Busta1121

Member - Posts: 9

Joined: June 20, 2005

Location: United States

Posted: June 21, 2005 at 8:30 PM / IP Logged

ok thanks

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

setting up my system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.