what amp for my 12'' he2’s

Home / the12volt's Install Bay / Car Audio / what amp for my 12'' he2’s (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Blowntweeters

Silver - Posts: 650

Joined: June 03, 2005

Location: Nevada, United States

Posted: June 23, 2005 at 9:04 PM / IP Logged

if its the power 800a2 its underrated so it will put out more power than what its rated at as far as the wireing go to www.rockfordfosgate.com and there is diagrams that show all the possable ohm loads if you wire the coils +to+ and- to- then each sub will be at 2 ohms then run 1 off each channel of the amp and you will get about 450 RMS to each sub i have 2 15" he's and i have about 550 rms 275 to each sub and its loud i think you will be happy with the power800a2 with those subs

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what amp for my 12'' he2’s

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.