791xv?

Home / the12volt's Install Bay / Car Security and Convenience / 791xv? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Pjx

Member - Posts: 14

Joined: April 03, 2005

Location: United States

Posted: June 24, 2005 at 4:49 PM / IP Logged

I have a Viper 791XV installed on my 94 Honda Civic. However, i tried to install the starter disable but it doesn't seem to work. I've connected the purple wire from the satellite relay to the starter side (blk/wht wire) and the green wire to the ignition side (blk/wht wire). Also everything else is connected except the secondary ignition wire (pink/white) and the orange wire on the relay isn't connected. Would this be the problem to the starter disable not working? Any help would be appreciated. Thanks!

Pjx

Member - Posts: 14

Joined: April 03, 2005

Location: United States

Posted: June 24, 2005 at 7:47 PM / IP Logged

I cut the blk/wht wire and soldered the purple to the starter side and then the green to the key side. When the alarm is triggered, I could still start the car.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.