compustar with 530t window module

I recently installed a compustar alarm with CM3000 brain along with 530t wondow module. when I tried to roll up the windows by arming the system. the windows wont go up. It only goes up when I turn of the ignition. What I dont understand is if the violet wire is a "ground when armed" wire, why does it become a ground as soon as the ignition is turned off? I removed the relay for the strater kill/ antigrind, and the violet wire remains grounded even with the alram unarmed. Im totally confused. I read somewhere on here about hooking up a diode but still doesnt make any sense if the ground is oming straight from the CM3000 brain. Thanks for any help!

can't offer any help with compustar. but most of the systems i've done are an orannge(groung when armed) was there an arange wire in the harness if so myabe test that wire

can't offer any help with compustar. but most of the systems i've done are an orange(groung when armed) was there an arange wire in the harness if so myabe test that wire

I've had this problem with compustars before the easiest solution is get a pulse time relay and wire to lock wire

I was able to solve this by putting a diode in line with the violet wire, it was getting a ground back from the relay coil, thus closing the windows.